Part single, part two-storey extensions in Richmond

The basics for Richmond at a glance.

Postcode districts: TW1, TW9 and TW10
County / area: Greater London, England
Price region: London
Guide price: £86,500–£119,000 (£2,400–£3,300 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Kew (1.6 miles), East Sheen (1.6 miles), Brentford (1.7 miles)
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Richmond we also work in Kew, East Sheen and Brentford, and across the rest of Greater London. Postcode districts in and near Richmond: TW1, TW9 and TW10.

What it costs in Richmond

In London, which includes Richmond, we'd expect a part single, part two-storey extension to cost around £86,500–£119,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £2,400–£3,300 per m² including VAT. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,210–£3,040 per m²	£79,500–£109,500
Standard	£2,400–£3,300 per m²	£86,500–£119,000
Premium	£2,880–£3,960 per m²	£103,500–£142,500

Planning and building regulations in Richmond

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Richmond homes

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Measure and listen
A visit to Richmond to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Richmond

How much does a part single, part two-storey extension cost in Richmond?

Our guide for London, which covers Richmond, is £2,400–£3,300 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £86,500–£119,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Richmond?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Richmond?

We cover Richmond (TW1, TW9 and TW10) and nearby places including Kew, East Sheen and Brentford, plus the rest of Greater London. The first site visit is free.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Close to Richmond? We work across the area, including:

Other extensions in Richmond

All two-storey extension services in Richmond · Part single, part two-storey extensions across Greater London

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.