Two-storey side extensions in Richmond

Before you start in Richmond, here's what applies.

Postcode districts: TW1, TW9 and TW10
County / area: Greater London, England
Price region: London
Guide price: £103,500–£138,500 (£2,460–£3,300 per m²)
Approval route: Planning permission is needed: in England, permitted development only allows single-storey extensions to the side.
Nearest towns: Kew (1.6 miles), East Sheen (1.6 miles), Brentford (1.7 miles)
First visit: Free, no obligation

About a two-storey side extension

A two-storey side extension is a new two-floor addition built into the space beside your house, often over a driveway or side passage. It typically adds one or two bedrooms upstairs and a utility, study or larger kitchen below, without giving up rear garden.

We cover postcode districts TW1, TW9 and TW10 in and around Richmond, along with neighbouring Kew, East Sheen and Brentford.

What it costs in Richmond

Using our London rates, a two-storey side extension with a 3 m × 7 m footprint on two floors (42 m² of new floor space) comes to about £103,500–£138,500, including VAT. Bigger or more glazed designs cost more per m². The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	A 3 m × 7 m footprint on two floors (42 m² of new floor space)
Essential	£2,260–£3,040 per m²	£95,000–£127,500
Standard	£2,460–£3,300 per m²	£103,500–£138,500
Premium	£2,950–£3,960 per m²	£124,000–£166,500

Planning and building regulations in Richmond

In England, a two-storey side extension always needs householder planning permission, because permitted development only allows single-storey extensions beyond a side wall. The fee is £548 (or £575 for applications made from 8 December 2026), and councils should decide within 8 weeks of validation. Expect them to look at set-back, roof height, gaps to the boundary and the effect on neighbours.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Richmond homes

Matching the ridge and roof

A hipped house usually needs a hipped extension roof, and a gabled house a gable. Matching the pitch, tiles, ridge detail and brick bond is what makes a side extension look original rather than added, and councils look closely at it on a front-facing addition.

Side windows, boundaries and gutters

Upstairs windows in the side wall face the neighbour, so they are usually obscure-glazed and fixed, or left out. Building close to the boundary also raises questions about foundations, overhanging gutters and access for maintenance, so we design the eaves and gutter to stay within your land.

How we'd run your project

Visit and first ideas
One of our team visits your house in Richmond, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Richmond.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about two-storey side extensions in Richmond

Which postcodes do you cover around Richmond?

We cover Richmond (TW1, TW9 and TW10) and nearby places including Kew, East Sheen and Brentford, plus the rest of Greater London. The first site visit is free.

Who handles building regulations for a project in Richmond?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a two-storey side extension in Richmond?

Richmond is in England, so England planning rules apply. Planning permission is needed: in England, permitted development only allows single-storey extensions to the side. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How much does a two-storey side extension cost in Richmond?

Our guide for London, which covers Richmond, is £2,460–£3,300 per m² including VAT. A typical project with a 3 m × 7 m footprint on two floors (42 m² of new floor space) comes to about £103,500–£138,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I build a two-storey side extension over my driveway?

Yes, if the drive is wide enough for a useful room and the council accepts the design. You may lose off-road parking, which some councils weigh up, and the foundations need to suit the ground below. We check parking, drains and meter positions at the free site visit before any drawings are prepared.

Nearby

Close to Richmond? We work across the area, including:

Other extensions in Richmond

All two-storey extension services in Richmond · Two-storey side extensions across Greater London

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Richmond.