Part single, part two-storey extensions in Speke

Before you start in Speke, here's what applies.

Postcode districts: L24
County / area: Merseyside, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Halewood (1.4 miles), Hunts Cross (1.5 miles), Garston (2.5 miles)
Distance to Liverpool: about 7.4 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Speke we also work in Halewood, Hunts Cross and Garston, and across the rest of Merseyside. Postcode district in and near Speke: L24.

What it costs in Speke

For budgeting in Speke, allow around £68,500–£94,000 for a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That's based on £1,900–£2,610 per m² including VAT for North West England. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Speke

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Speke homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Free site visit
We visit your home in Speke, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Speke

How much does a part single, part two-storey extension cost in Speke?

Our guide for North West England, which covers Speke, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Speke?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Speke?

We cover Speke (L24) and nearby places including Halewood, Hunts Cross and Garston, plus the rest of Merseyside. The first site visit is free.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

The same service in neighbouring towns:

Other extensions in Speke

All two-storey extension services in Speke · Part single, part two-storey extensions across Merseyside

Book a free site visit in Speke and we'll tell you what's possible, what approvals you need and what the design stage would cost.