Two-storey wraparound extensions in Speke
We cover Speke and the rest of Merseyside for two-storey wraparound extensions. Start with a free site visit and a plain-English view of what your house and plot can take.
Before you start in Speke, here's what applies.
- Postcode districts
- L24
- County / area
- Merseyside, England
- Price region
- North West England
- Guide price
- £114,500–£157,000 (£2,040–£2,800 per m²)
- Approval route
- Planning permission is needed: the side part takes it outside permitted development in England.
- Nearest towns
- Halewood (1.4 miles), Hunts Cross (1.5 miles), Garston (2.5 miles)
- Distance to Liverpool
- about 7.4 miles
- First visit
- Free, no obligation
About a two-storey wraparound extension
A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above. In England it needs planning permission, because the side part is more than one storey.
Around Speke we also work in Halewood, Hunts Cross and Garston, and across the rest of Merseyside. Postcode district in and near Speke: L24.
What it costs in Speke
Our guide for North West England is £2,040–£2,800 per m² including VAT. On a project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space), that puts a two-storey wraparound extension in Speke at roughly £114,500–£157,000. Design fees, structural calculations and approval fees are separate and listed on our prices page.
| Spec | Per m² | An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) |
|---|---|---|
| Essential | £1,880–£2,580 per m² | £105,000–£144,500 |
| Standard | £2,040–£2,800 per m² | £114,500–£157,000 |
| Premium | £2,450–£3,360 per m² | £137,500–£188,500 |
Planning and building regulations in Speke
In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Speke homes
Phasing the build
A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.
Daylight to the middle
A deep L-shaped plan can leave the middle of the ground floor dark, because the old rear rooms are now enclosed. We use wide rear openings, a well-placed stair and, where part of the extension is single storey, roof lights, while keeping total glazing within the Part L allowance.
How we'd run your project
Look at the house
We start in Speke with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Speke.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about two-storey wraparound extensions in Speke
Which postcodes do you cover around Speke?
We cover Speke (L24) and nearby places including Halewood, Hunts Cross and Garston, plus the rest of Merseyside. The first site visit is free.
Who handles building regulations for a project in Speke?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How long does a two-storey wraparound extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Does a wraparound extension need steel?
Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.
Is a wraparound extension better than separate side and rear extensions?
Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.
Nearby
Close to Speke? We work across the area, including:
Other extensions in Speke
- Rear
- Side
- Part two-storey
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Speke · Two-storey wraparound extensions across Merseyside
Book a free site visit in Speke and we'll tell you what's possible, what approvals you need and what the design stage would cost.