Part single, part two-storey extensions in Steynton
For a part single, part two-storey extension in Steynton, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Dyfed.
What we'd confirm first for a project in Steynton.
- Postcode districts
- SA73
- County / area
- Dyfed, Wales
- Price region
- Wales
- Guide price
- £66,000–£91,000 (£1,840–£2,530 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Milford Haven (1.3 miles), Neyland (3.1 miles), Pembroke Dock (4.2 miles)
- Distance to Llanelli
- about 36.8 miles
- First visit
- Free, no obligation
About a part single, part two-storey extension
A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.
We cover postcode district SA73 in and around Steynton, along with neighbouring Milford Haven, Neyland and Pembroke Dock.
What it costs in Steynton
A guide price for Steynton: around £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That works out at £1,840–£2,530 per m² of new floor space, including VAT at 20%. Professional fees for drawings and the structural engineer are listed separately on our prices page.
| Spec | Per m² | A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) |
|---|---|---|
| Essential | £1,690–£2,330 per m² | £61,000–£84,000 |
| Standard | £1,840–£2,530 per m² | £66,000–£91,000 |
| Premium | £2,210–£3,040 per m² | £79,500–£109,500 |
Planning and building regulations in Steynton
In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Steynton homes
Structure at the step
The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.
The roof junction
Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.
How we'd run your project
Visit and first ideas
One of our team visits your house in Steynton, checks the walls, roof and drains, and sketches out options with you.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.
Questions about part single, part two-storey extensions in Steynton
Do I need planning permission for a part single, part two-storey extension in Steynton?
Steynton is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
How much does a part single, part two-storey extension cost in Steynton?
Our guide for Wales, which covers Steynton, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Steynton?
We cover Steynton (SA73) and nearby places including Milford Haven, Neyland and Pembroke Dock, plus the rest of Dyfed. The first site visit is free.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Nearby
Other towns near Steynton:
Other extensions in Steynton
- Rear
- Side
- Wraparound
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Steynton · Part single, part two-storey extensions across Dyfed
Book a free site visit in Steynton and we'll tell you what's possible, what approvals you need and what the design stage would cost.