Part single, part two-storey extensions in Dyfed
From first sketch to completion certificate, we deliver part single, part two-storey extensions for homeowners across Dyfed.
Dyfed at a glance
- Nation
- Wales
- Price region
- Wales
- Postcode areas
- SA, SY
- Towns covered
- 21 listed below, plus surrounding villages
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Site visits
- Free, no obligation
What a part single, part two-storey extension involves
A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.
Dyfed towns we list: Llanelli (SA15), Ammanford (SA18), Aberystwyth (SY24), Carmarthen (SA31), Haverfordwest (SA61) and Milford Haven (SA73). Every other address in Dyfed is covered as well.
Guide price in Wales
Most of the cost of a part single, part two-storey extension is set by its size and specification. For Dyfed and the rest of Wales, our guide is £1,840–£2,530 per m² including VAT, so about £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.
| Spec | Per m² | Typical project |
|---|---|---|
| Essential | £1,690–£2,330 per m² | £61,000–£84,000 |
| Standard | £1,840–£2,530 per m² | £66,000–£91,000 |
| Premium | £2,210–£3,040 per m² | £79,500–£109,500 |
Rules in Wales
In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
The Party Wall etc. Act 1996 applies in Wales, so notices may be needed for work on or near a shared wall or boundary.
Getting the design right
Where to put the two-storey part
The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.
Structure at the step
The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.
How we work in Dyfed
Measure and listen
A visit to Dyfed to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Design and approvals
We draw the extension and check it against the rules for Wales, then apply for planning permission or a certificate of lawfulness, whichever fits.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.
Towns we cover in Dyfed
- Llanelli
- Ammanford
- Aberystwyth
- Carmarthen
- Haverfordwest
- Milford Haven
- Pembroke Dock
- Burry Port
- Pembroke
- Brynamman
- Cardigan
- Tenby
- Cross Hands
- Glanamman
- Tumble
- Neyland
- Llangeler
- Fishguard
- Saundersfoot
- Penparcau
- Steynton
Part single, part two-storey extensions in Dyfed: questions
How much does a part single, part two-storey extension cost in Dyfed?
In Wales our guide is £1,840–£2,530 per m² including VAT, so about £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Essential and Premium specs move that by roughly 8% down or 20% up.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Will I need planning permission in Dyfed?
Dyfed is in Wales. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Neighbouring areas
- Part single, part two-storey extensions in Swansea and Neath Port Talbot
- Part single, part two-storey extensions in Mid Glamorgan
- Part single, part two-storey extensions in Powys
- Part single, part two-storey extensions in Cardiff and the Vale of Glamorgan
All extension services in Dyfed · About part single, part two-storey extensions
Ready to see what a second storey could do for your home?
Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.