Part single, part two-storey extensions in Tenby

Useful details for planning a part single, part two-storey extension in Tenby.

Postcode districts: SA70
County / area: Dyfed, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Saundersfoot (2.5 miles), Pembroke (8.9 miles), Pembroke Dock (10.2 miles)
Distance to Llanelli: about 23.3 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Around Tenby we also work in Saundersfoot, Pembroke and Pembroke Dock, and across the rest of Dyfed. Postcode district in and near Tenby: SA70.

What it costs in Tenby

A guide price for Tenby: around £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That works out at £1,840–£2,530 per m² of new floor space, including VAT at 20%. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Tenby

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Tenby homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Visit and first ideas
One of our team visits your house in Tenby, checks the walls, roof and drains, and sketches out options with you.
Design and approvals
We draw the extension and check it against the rules for Wales, then apply for planning permission or a certificate of lawfulness, whichever fits.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Tenby

How much does a part single, part two-storey extension cost in Tenby?

Our guide for Wales, which covers Tenby, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Tenby?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Other towns near Tenby:

Other extensions in Tenby

All two-storey extension services in Tenby · Part single, part two-storey extensions across Dyfed

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Tenby.