Publow · Bristol

Two-storey extensions for semi-detached houses in Publow

Want to stay in Publow but need more space? A two-storey extension for a semi-detached house adds floor area on two levels without giving up much garden. Here's what's involved.

Publow: the key facts for this kind of project.

Postcode districts
BS14
County / area
Bristol, England
Price region
South West England
Guide price
£57,500–£78,000 (£2,060–£2,780 per m²)
Approval route
Depends on position: a two-storey rear extension may be permitted development (3 m deep, 7 m from the rear boundary); a two-storey side extension needs planning permission.
Nearest towns
Whitchurch (Bristol) (2.1 miles), Chew Magna (3 miles), Keynsham (3.1 miles)
First visit
Free, no obligation

About a two-storey extension for a semi-detached house

This service suits you if you own a semi-detached house and want to add bedrooms and living space without moving. On a semi, the main questions are which side to build on and how to treat the attached neighbour. You get a survey, design options, the approvals your nation needs and the build, carried out by vetted teams working under S&K.

We cover Publow (BS14) and the places around it, including Whitchurch (Bristol) (2.1 miles), Chew Magna (3.0 miles) and Keynsham.

What it costs in Publow

Expect a two-storey extension for a semi-detached house in Publow to land somewhere around £57,500–£78,000 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Our South West England guide rate is £2,060–£2,780 per m², including VAT. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

SpecPer m²A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential£1,900–£2,560 per m²£53,000–£71,500
Standard£2,060–£2,780 per m²£57,500–£78,000
Premium£2,470–£3,340 per m²£69,000–£93,500

Planning and building regulations in Publow

In England, a two-storey rear extension on a semi can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary, with matching materials and roof pitch. A two-storey side or wraparound extension always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026). Protected areas such as conservation areas exclude two-storey rear permitted development.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Publow homes

The attached neighbour's light

A two-storey rear extension next to the party wall can take light from the neighbour's rear windows. Councils often use a 45-degree test, so the first floor may need to be shorter than the ground floor or set in from the shared boundary.

Rear, side or both

On a semi, a rear extension sits against the attached neighbour, while a side extension faces the detached neighbour and the street. We compare the space, cost and approval route for each, and for a wraparound, before you commit to one design.

How we'd run your project

  1. Understand the brief

    At your home in Publow we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.

  2. Plans, then approval

    Measured survey, design, then the right approval route for your house. We explain each step before we take it.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. Finish and certify

    Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about two-storey extensions for semi-detached houses in Publow

How long does a two-storey extension for a semi-detached house take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a two-storey extension for a semi-detached house cost in Publow?

Our guide for South West England, which covers Publow, is £2,060–£2,780 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £57,500–£78,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Publow?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Will a side extension make my semi look like a terrace?

It can if it fills the whole gap to the boundary at first floor and the neighbour does the same. Many councils ask for a first-floor gap to the side boundary or a set-back for this reason. We design the extension to keep the semi reading as one of a pair.

What if my neighbour has already extended?

That often helps. An existing extension next door can reduce the effect of yours on their light, and may show what the council accepts on your street. It can also mean building alongside their wall, so we check its position, foundations and any windows facing your plot at the survey.

Nearby

Other towns near Publow:

Other extensions in Publow

All two-storey extension services in Publow · Two-storey extensions for semi-detached houses across Bristol

Book a free site visit in Publow and we'll tell you what's possible, what approvals you need and what the design stage would cost.

CallGuide price