Gwynedd and Anglesey · Wales

Two-storey extension plans and drawings in Gwynedd and Anglesey

We handle extension plans and drawings for homeowners across Gwynedd and Anglesey, from the first visit to the final paperwork.

Gwynedd and Anglesey at a glance

Nation
Wales
Price region
Wales
Postcode areas
LL
Towns covered
10 listed below, plus surrounding villages
Site visits
Free, no obligation

What a set of extension plans involves

Two-storey extension plans involve a measured survey of your house, design options, and a set of scaled drawings showing the existing and proposed floor plans, elevations, a site plan and a location plan. These are the drawings needed for a planning application or lawful development certificate. Building regulations drawings with construction details follow as a separate, more technical set.

Gwynedd and Anglesey towns we list: Bangor (Gwynedd and Anglesey) (LL57), Holyhead (LL64), Caernarfon (LL54), Llangefni (LL60), Bethesda (LL57) and Pwllheli (LL51). Every other address in Gwynedd and Anglesey is covered as well.

Fees

Planning drawings (survey and design) are a guide of £2,000–£3,500 and building regulations drawings and specification £1,500–£4,000, with your design stage priced in writing before it starts.

Rules in Wales

In Wales, the plans need to show the measurements the Welsh rules depend on: the 4 m and 3 m rear depths, the 10.5 m distances to boundaries and, for side extensions, the 1 m set-back and 50% width test. A householder application costs £585. Building regulations drawings follow the Welsh Approved Documents.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

The Party Wall etc. Act 1996 applies in Wales, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Start with a measured survey

Accurate drawings depend on accurate measurements of the house, the boundaries and neighbouring windows. We measure inside and out, note levels, drains and trees, and record the original house so permitted development limits can be checked against the right starting point.

Planning drawings versus building regulations drawings

Planning drawings show what the extension looks like and how it affects neighbours. Building regulations drawings show how it is built: foundations, structure, insulation, fire safety, ventilation and drainage. Most two-storey extensions need both, prepared at different stages.

How we work in Gwynedd and Anglesey

  1. Start at your house

    We come to your home in Gwynedd and Anglesey, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Choose the approval route

    Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.

  3. Fixed price in writing

    With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.

  4. Finish and certify

    Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Towns we cover in Gwynedd and Anglesey

Two-storey extension plans and drawings in Gwynedd and Anglesey: questions

Do I own the plans once they are drawn?

You receive copies of the drawings to use for your project, including your planning application and building regulations approval. Copyright in drawings normally stays with whoever prepares them unless agreed otherwise. Your written design stage price sets out how the drawings can be used.

How long do extension plans take to prepare?

Survey, design and planning drawings usually take 4 to 8 weeks, depending on how many options you want to explore. Technical design, structural calculations and building control approval take a further 4 to 8 weeks, and this can overlap with the planning decision period.

Do the plans include structural calculations?

Not at planning stage. Structural calculations and beam design are prepared by a structural engineer once the design is agreed, and they form part of the building regulations package. We coordinate the engineer's work with the drawings so steel sizes and floor depths match.

Neighbouring areas

All extension services in Gwynedd and Anglesey · About two-storey extension plans and drawings

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price