Two-storey rear extensions in Barton-upon-Humber

The basics for Barton-upon-Humber at a glance.

Postcode districts: DN18 and DN19
County / area: Lincolnshire, England
Price region: East Midlands
Guide price: £55,000–£74,000 (£1,960–£2,650 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hull (5.9 miles), Brough (5.9 miles), Immingham (10.7 miles)
Distance to Lincoln: about 32.2 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension is a new two-floor addition built onto the back of your house, usually giving a larger kitchen or living space on the ground floor and one or two bedrooms or a bathroom above. Because both floors share one set of foundations and one roof, it adds a lot of floor space for the garden it uses. In some cases it can be built under permitted development, depending on where you live.

We cover postcode districts DN18 and DN19 in and around Barton-upon-Humber, along with neighbouring Hull, Brough and Immingham.

What it costs in Barton-upon-Humber

Our guide for the East Midlands is £1,960–£2,650 per m² including VAT. On a project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), that puts a two-storey rear extension in Barton-upon-Humber at roughly £55,000–£74,000. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,800–£2,430 per m²	£50,500–£68,000
Standard	£1,960–£2,650 per m²	£55,000–£74,000
Premium	£2,350–£3,180 per m²	£66,000–£89,000

Planning and building regulations in Barton-upon-Humber

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Barton-upon-Humber homes

Upstairs layout and windows

Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.

Roof form

A hipped or gabled roof that matches the pitch of the main house usually looks best, and matching the pitch is a permitted development condition in England. Keeping the ridge below the main ridge makes the extension read as secondary and avoids awkward junctions with existing gutters and windows.

How we'd run your project

Look at the house
We start in Barton-upon-Humber with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about two-storey rear extensions in Barton-upon-Humber

Who handles building regulations for a project in Barton-upon-Humber?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a two-storey rear extension cost in Barton-upon-Humber?

Our guide for the East Midlands, which covers Barton-upon-Humber, is £1,960–£2,650 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £55,000–£74,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Barton-upon-Humber?

We cover Barton-upon-Humber (DN18 and DN19) and nearby places including Hull, Brough and Immingham, plus the rest of Lincolnshire. The first site visit is free.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Nearby

The same service in neighbouring towns:

Other extensions in Barton-upon-Humber

All two-storey extension services in Barton-upon-Humber · Two-storey rear extensions across Lincolnshire

Book a free site visit in Barton-upon-Humber and we'll tell you what's possible, what approvals you need and what the design stage would cost.