Kelty · Fife

Two-storey wraparound extensions in Kelty

We plan and build two-storey wraparound extensions for homeowners in Kelty and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.

Useful details for planning a two-storey wraparound extension in Kelty.

Postcode districts
KY4
County / area
Fife, Scotland
Price region
Scotland
Guide price
£113,000–£155,500 (£2,020–£2,770 per m²)
Approval route
Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns
Cowdenbeath (2.2 miles), Lochgelly (3 miles), Ballingry (3.1 miles)
Distance to Dunfermline
about 5.1 miles
First visit
Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above.

We cover postcode district KY4 in and around Kelty, along with neighbouring Cowdenbeath, Lochgelly and Ballingry.

What it costs in Kelty

Most of the cost of a two-storey wraparound extension is set by its size and specification. For Kelty and the rest of Scotland, our guide is £2,020–£2,770 per m² including VAT, so about £113,000–£155,500 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

SpecPer m²An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential£1,860–£2,550 per m²£104,000–£143,000
Standard£2,020–£2,770 per m²£113,000–£155,500
Premium£2,430–£3,330 per m²£136,000–£186,500

Planning and building standards in Kelty

In Scotland, a two-storey wraparound would need to be at least 10 m from every boundary to be permitted development under Class 1B, and not on an elevation fronting a road. That is rarely possible, so plan for a householder planning application, which costs £371 and is decided within two months, followed by a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Kelty homes

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

How we'd run your project

  1. Visit and first ideas

    One of our team visits your house in Kelty, checks the walls, roof and drains, and sketches out options with you.

  2. Design and approvals

    We draw the extension and check it against the rules for Scotland, then apply for planning permission or a certificate of lawfulness, whichever fits.

  3. Structure and building standards

    A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey wraparound extensions in Kelty

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Do I need planning permission for a two-storey wraparound extension in Kelty?

Kelty is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.

Who handles building standards for a project in Kelty?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much floor space does a wraparound extension add?

It depends on the width of the side plot and the depth at the rear. Our guide prices are based on a typical wraparound with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Yours may be larger or smaller, and the measured survey shows what your plot can take.

Is a wraparound extension better than separate side and rear extensions?

Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.

Nearby

We also cover places near Kelty, including:

Other extensions in Kelty

All two-storey extension services in Kelty · Two-storey wraparound extensions across Fife

Tell us about your house in Kelty and we'll call you back to arrange a free, no-obligation visit.

CallGuide price