Two-storey wraparound extensions in Cowdenbeath

What we'd confirm first for a project in Cowdenbeath.

Postcode districts: KY4
County / area: Fife, Scotland
Price region: Scotland
Guide price: £113,000–£155,500 (£2,020–£2,770 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Lochgelly (1.7 miles), Kelty (2.2 miles), Ballingry (3.6 miles)
Distance to Dunfermline: about 5.2 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension suits a house with space both beside it and behind it, where you want to transform the layout rather than add a single room. You get one design for the whole L-shape, the planning application, structural design for the corner and the openings into the house, a building warrant and the build, managed by us and carried out by vetted teams working under S&K.

Around Cowdenbeath we also work in Lochgelly, Kelty and Ballingry, and across the rest of Fife. Postcode district in and near Cowdenbeath: KY4.

What it costs in Cowdenbeath

A guide price for Cowdenbeath: around £113,000–£155,500 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). That works out at £2,020–£2,770 per m² of new floor space, including VAT at 20%. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£1,860–£2,550 per m²	£104,000–£143,000
Standard	£2,020–£2,770 per m²	£113,000–£155,500
Premium	£2,430–£3,330 per m²	£136,000–£186,500

Planning and building standards in Cowdenbeath

In Scotland, a two-storey wraparound would need to be at least 10 m from every boundary to be permitted development under Class 1B, and not on an elevation fronting a road. That is rarely possible, so plan for a householder planning application, which costs £371 and is decided within two months, followed by a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Cowdenbeath homes

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

The corner post

At the outside corner of the L, there is no existing wall to carry the floor above. Opening the ground floor fully usually means a steel frame or a corner post, and the engineer's design sets how slim it can be. We decide early whether you want a clear corner or a visible post.

How we'd run your project

Look at the house
We start in Cowdenbeath with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Design and approvals
We draw the extension and check it against the rules for Scotland, then apply for planning permission or a certificate of lawfulness, whichever fits.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey wraparound extensions in Cowdenbeath

Who handles building standards for a project in Cowdenbeath?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a two-storey wraparound extension cost in Cowdenbeath?

Our guide for Scotland, which covers Cowdenbeath, is £2,020–£2,770 per m² including VAT. A typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) comes to about £113,000–£155,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Is a wraparound extension better than separate side and rear extensions?

Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Nearby

Close to Cowdenbeath? We work across the area, including:

Other extensions in Cowdenbeath

All two-storey extension services in Cowdenbeath · Two-storey wraparound extensions across Fife

Book a free site visit in Cowdenbeath and we'll tell you what's possible, what approvals you need and what the design stage would cost.