First-floor extensions in Cowdenbeath

Quick reference for homeowners in Cowdenbeath.

Postcode districts: KY4
County / area: Fife, Scotland
Price region: Scotland
Guide price: £23,500–£34,000 (£1,690–£2,440 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Lochgelly (1.7 miles), Kelty (2.2 miles), Ballingry (3.6 miles)
Distance to Dunfermline: about 5.2 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, a building warrant and the build, managed by us and carried out by vetted teams working under S&K.

We cover Cowdenbeath (KY4) and the places around it, including Lochgelly (1.7 miles), Kelty (2.2 miles) and Ballingry.

What it costs in Cowdenbeath

Guide prices for first-floor extensions in Scotland are around £1,690–£2,440 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £23,500–£34,000. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,560–£2,250 per m²	£22,000–£31,500
Standard	£1,690–£2,440 per m²	£23,500–£34,000
Premium	£2,030–£2,930 per m²	£28,500–£41,000

Planning and building standards in Cowdenbeath

In Scotland, permitted development for extensions of more than one storey (Class 1B) needs at least 10 m to every boundary and no part higher than the house. Most first-floor extensions cannot meet the 10 m test, so plan for a householder application (£371, decided within two months) and a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Cowdenbeath homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building standards drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Measure and listen
A visit to Cowdenbeath to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Cowdenbeath.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the completion certificate at the end.

Questions about first-floor extensions in Cowdenbeath

How much does a first-floor extension cost in Cowdenbeath?

Our guide for Scotland, which covers Cowdenbeath, is £1,690–£2,440 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,500–£34,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Do I need planning permission for a first-floor extension in Cowdenbeath?

Cowdenbeath is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original a building warrant and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

We also cover places near Cowdenbeath, including:

Other extensions in Cowdenbeath

All two-storey extension services in Cowdenbeath · First-floor extensions across Fife

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Cowdenbeath.