First-floor extensions in Burntisland
Thinking about a first-floor extension in Burntisland? We design it, take it through the approvals it needs and build it, with one team responsible from the first visit to the final certificate.
Before you start in Burntisland, here's what applies.
- Postcode districts
- KY3
- County / area
- Fife, Scotland
- Price region
- Scotland
- Guide price
- £23,500–£34,000 (£1,690–£2,440 per m²)
- Approval route
- Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
- Nearest towns
- Dalgety Bay (4.7 miles), Kirkcaldy (5 miles), Cowdenbeath (5.5 miles)
- Distance to Dunfermline
- about 8.6 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
We cover postcode district KY3 in and around Burntisland, along with neighbouring Dalgety Bay, Kirkcaldy and Cowdenbeath.
What it costs in Burntisland
For budgeting in Burntisland, allow around £23,500–£34,000 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,690–£2,440 per m² including VAT for Scotland. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,560–£2,250 per m² | £22,000–£31,500 |
| Standard | £1,690–£2,440 per m² | £23,500–£34,000 |
| Premium | £2,030–£2,930 per m² | £28,500–£41,000 |
Planning and building standards in Burntisland
In Scotland, permitted development for extensions of more than one storey (Class 1B) needs at least 10 m to every boundary and no part higher than the house. Most first-floor extensions cannot meet the 10 m test, so plan for a householder application (£371, decided within two months) and a building warrant before work starts.
Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.
Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.
Design points for Burntisland homes
Tying into the house
The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
How we'd run your project
Free site visit
We visit your home in Burntisland, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Scotland before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.
Questions about first-floor extensions in Burntisland
Who handles building standards for a project in Burntisland?
We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Do I need planning permission for a first-floor extension in Burntisland?
Burntisland is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
How much does a first-floor extension cost in Burntisland?
Our guide for Scotland, which covers Burntisland, is £1,690–£2,440 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,500–£34,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original a building warrant and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
Nearby towns we cover for first-floor extensions:
Other extensions in Burntisland
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Burntisland · First-floor extensions across Fife
Book a free site visit in Burntisland and we'll tell you what's possible, what approvals you need and what the design stage would cost.