Two-storey wraparound extensions in Somerset

Somerset at a glance

Nation: England
Price region: South West England
Postcode areas: BA, BS, TA
Towns covered: 18 listed below, plus surrounding villages
Approval route: Planning permission is needed: the side part takes it outside permitted development in England.
Site visits: Free, no obligation

What a two-storey wraparound extension involves

A two-storey wraparound extension suits a house with space both beside it and behind it, where you want to transform the layout rather than add a single room. You get one design for the whole L-shape, the planning application, structural design for the corner and the openings into the house, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

The main places we list in Somerset are Bath (BA1), Weston-super-Mare (BS22), Taunton (TA1), Yeovil (BA20), Bridgwater (TA5) and Portishead (BS20). We cover the villages in between too.

Guide price in South West England

Guide prices for two-storey wraparound extensions in South West England are around £2,210–£3,040 per m² of new floor space, including VAT. For a typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space), that's roughly £124,000–£170,000. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	Typical project
Essential	£2,040–£2,800 per m²	£114,000–£156,500
Standard	£2,210–£3,040 per m²	£124,000–£170,000
Premium	£2,660–£3,650 per m²	£149,000–£204,000

Rules in England

In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

How we work in Somerset

Measure and listen
A visit to Somerset to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Towns we cover in Somerset

Two-storey wraparound extensions in Somerset: questions

How much does a two-storey wraparound extension cost in Somerset?

In South West England our guide is £2,210–£3,040 per m² including VAT, so about £124,000–£170,000 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

Can I stay at home during a wraparound extension?

Many people do, but a wraparound affects two sides of the house and usually the kitchen, so there will be weeks without a full kitchen. We plan a temporary kitchen, keep a route through the house and seal off the work area. For some families, moving out while the rear wall is opened up is easier.

Is a wraparound extension better than separate side and rear extensions?

Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.

Will I need planning permission in Somerset?

Somerset is in England. Planning permission is needed: the side part takes it outside permitted development in England.

Neighbouring areas

All extension services in Somerset · About two-storey wraparound extensions