Two-storey extensions for detached houses in Biggleswade

Useful details for planning a two-storey extension for a detached house in Biggleswade.

Postcode districts: SG18
County / area: Bedfordshire, England
Price region: East of England
Guide price: £88,500–£119,000 (£2,110–£2,830 per m²)
Approval route: Depends on position: a two-storey rear extension may be permitted development (3 m deep, 7 m from the rear boundary); a two-storey side extension needs planning permission.
Nearest towns: Sandy (3.1 miles), Henlow (4 miles), Baldock (7.6 miles)
Distance to Luton: about 15.7 miles
First visit: Free, no obligation

About a two-storey extension for a detached house

This service suits you if you own a detached house and want a substantial amount of extra space, whether a side extension over a drive, a rear extension into the garden or a wraparound. You get a survey of the whole plot, options that compare layouts and costs, the approvals your nation needs, structural design and the build, carried out by vetted teams working under S&K.

Biggleswade sits about 15.7 miles from Luton. Closer to home, Sandy is 3.1 miles away and Henlow 4.0 miles.

What it costs in Biggleswade

Most of the cost of a two-storey extension for a detached house is set by its size and specification. For Biggleswade and the rest of the East of England, our guide is £2,110–£2,830 per m² including VAT, so about £88,500–£119,000 for a 3 m × 7 m footprint on two floors (42 m² of new floor space). We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 3 m × 7 m footprint on two floors (42 m² of new floor space)
Essential	£1,940–£2,610 per m²	£81,500–£109,500
Standard	£2,110–£2,830 per m²	£88,500–£119,000
Premium	£2,530–£3,400 per m²	£106,500–£143,000

Planning and building regulations in Biggleswade

In England, a two-storey rear extension on a detached house can be permitted development within 3 m of the original rear wall and at least 7 m from the rear boundary, with matching roof pitch and materials, outside protected areas. Any two-storey side or wraparound extension needs planning permission, costing £548 (or £575 for applications made from 8 December 2026), with a decision due within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Biggleswade homes

Keeping it subordinate

Large detached houses can take a large extension, but councils still expect it to look secondary to the main house. A lower ridge, a modest set-back at the front and matching materials keep the proportions right, even on a wide plot.

Larger spans and steelwork

Bigger extensions often mean wider openings and longer spans, which need more steel and sometimes a steel frame. The engineer designs these early, because the size of the steel affects ceiling heights, floor depths and the cost.

How we'd run your project

Understand the brief
At your home in Biggleswade we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey extensions for detached houses in Biggleswade

Which postcodes do you cover around Biggleswade?

We cover Biggleswade (SG18) and nearby places including Sandy, Henlow and Baldock, plus the rest of Bedfordshire. The first site visit is free.

Who handles building regulations for a project in Biggleswade?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a two-storey extension for a detached house cost in Biggleswade?

Our guide for the East of England, which covers Biggleswade, is £2,110–£2,830 per m² including VAT. A typical project with a 3 m × 7 m footprint on two floors (42 m² of new floor space) comes to about £88,500–£119,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Is a detached house extension a better investment than moving?

It often costs less than the gap between your house and a larger one nearby, once property tax, legal fees and removal costs are counted, but that depends on your area. Extending also has limits: every street has a ceiling price. We give you build costs so you can compare them with local asking prices.

Can I extend a detached house on both sides?

Sometimes. With planning permission, a council may accept extensions on both sides if the house stays well proportioned and keeps gaps to the boundaries. It is more common to extend on one side and the rear, or with a wraparound. We look at the plot as a whole before suggesting more than one extension.

Nearby

We also cover places near Biggleswade, including:

Other extensions in Biggleswade

All two-storey extension services in Biggleswade · Two-storey extensions for detached houses across Bedfordshire

Want a figure first? Try our guide price tool, then book a free visit to firm it up.