Two-storey rear extensions in Biggleswade

Biggleswade: the key facts for this kind of project.

Postcode districts: SG18
County / area: Bedfordshire, England
Price region: East of England
Guide price: £57,500–£78,000 (£2,060–£2,780 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Sandy (3.1 miles), Henlow (4 miles), Baldock (7.6 miles)
Distance to Luton: about 15.7 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension is a new two-floor addition built onto the back of your house, usually giving a larger kitchen or living space on the ground floor and one or two bedrooms or a bathroom above. Because both floors share one set of foundations and one roof, it adds a lot of floor space for the garden it uses. In some cases it can be built under permitted development, depending on where you live.

Biggleswade sits about 15.7 miles from Luton. Closer to home, Sandy is 3.1 miles away and Henlow 4.0 miles.

What it costs in Biggleswade

For budgeting in Biggleswade, allow around £57,500–£78,000 for a two-storey rear extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). That's based on £2,060–£2,780 per m² including VAT for the East of England. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,900–£2,560 per m²	£53,000–£71,500
Standard	£2,060–£2,780 per m²	£57,500–£78,000
Premium	£2,470–£3,340 per m²	£69,000–£93,500

Planning and building regulations in Biggleswade

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Biggleswade homes

Upstairs layout and windows

Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.

Depth and neighbours' light

Councils check that a two-storey rear extension does not take too much light or outlook from neighbouring windows, and many use a 45-degree line drawn from the nearest habitable window. We test this at sketch stage, so the depth you are shown is one that can realistically be approved.

How we'd run your project

Visit and first ideas
One of our team visits your house in Biggleswade, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Biggleswade.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about two-storey rear extensions in Biggleswade

Who handles building regulations for a project in Biggleswade?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a two-storey rear extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Biggleswade?

We cover Biggleswade (SG18) and nearby places including Sandy, Henlow and Baldock, plus the rest of Bedfordshire. The first site visit is free.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Nearby

Close to Biggleswade? We work across the area, including:

Other extensions in Biggleswade

All two-storey extension services in Biggleswade · Two-storey rear extensions across Bedfordshire

Book a free site visit in Biggleswade and we'll tell you what's possible, what approvals you need and what the design stage would cost.