Two-storey wraparound extensions in Biggleswade

Useful details for planning a two-storey wraparound extension in Biggleswade.

Postcode districts: SG18
County / area: Bedfordshire, England
Price region: East of England
Guide price: £124,000–£170,000 (£2,210–£3,040 per m²)
Approval route: Planning permission is needed: the side part takes it outside permitted development in England.
Nearest towns: Sandy (3.1 miles), Henlow (4 miles), Baldock (7.6 miles)
Distance to Luton: about 15.7 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension suits a house with space both beside it and behind it, where you want to transform the layout rather than add a single room. You get one design for the whole L-shape, the planning application, structural design for the corner and the openings into the house, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Around Biggleswade we also work in Sandy, Henlow and Baldock, and across the rest of Bedfordshire. Postcode district in and near Biggleswade: SG18.

What it costs in Biggleswade

A guide price for Biggleswade: around £124,000–£170,000 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). That works out at £2,210–£3,040 per m² of new floor space, including VAT at 20%. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£2,040–£2,800 per m²	£114,000–£156,500
Standard	£2,210–£3,040 per m²	£124,000–£170,000
Premium	£2,660–£3,650 per m²	£149,000–£204,000

Planning and building regulations in Biggleswade

In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Biggleswade homes

Daylight to the middle

A deep L-shaped plan can leave the middle of the ground floor dark, because the old rear rooms are now enclosed. We use wide rear openings, a well-placed stair and, where part of the extension is single storey, roof lights, while keeping total glazing within the Part L allowance.

The corner post

At the outside corner of the L, there is no existing wall to carry the floor above. Opening the ground floor fully usually means a steel frame or a corner post, and the engineer's design sets how slim it can be. We decide early whether you want a clear corner or a visible post.

How we'd run your project

Start at your house
We come to your home in Biggleswade, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey wraparound extensions in Biggleswade

How much does a two-storey wraparound extension cost in Biggleswade?

Our guide for the East of England, which covers Biggleswade, is £2,210–£3,040 per m² including VAT. A typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) comes to about £124,000–£170,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Biggleswade?

We cover Biggleswade (SG18) and nearby places including Sandy, Henlow and Baldock, plus the rest of Bedfordshire. The first site visit is free.

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Is a wraparound extension better than separate side and rear extensions?

Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Nearby

The same service in neighbouring towns:

Other extensions in Biggleswade

All two-storey extension services in Biggleswade · Two-storey wraparound extensions across Bedfordshire

Want a figure first? Try our guide price tool, then book a free visit to firm it up.