First-floor extensions in Briton Ferry
If you live in Briton Ferry and need more room without moving, a first-floor extension is worth a serious look. We handle the drawings, approvals, structure and build.
The basics for Briton Ferry at a glance.
- Postcode districts
- SA12
- County / area
- Swansea and Neath Port Talbot, Wales
- Price region
- Wales
- Guide price
- £23,000–£33,500 (£1,660–£2,390 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Neath (2.3 miles), Cwmafan (2.6 miles), Clydach (5 miles)
- Distance to Swansea
- about 5.4 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
Briton Ferry sits about 5.4 miles from Swansea. Closer to home, Neath is 2.3 miles away and Cwmafan 2.6 miles.
What it costs in Briton Ferry
For budgeting in Briton Ferry, allow around £23,000–£33,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,660–£2,390 per m² including VAT for Wales. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,520–£2,200 per m² | £21,500–£31,000 |
| Standard | £1,660–£2,390 per m² | £23,000–£33,500 |
| Premium | £1,990–£2,870 per m² | £28,000–£40,000 |
Planning and building regulations in Briton Ferry
In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Briton Ferry homes
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
Replacing the flat roof
The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.
How we'd run your project
Visit and first ideas
One of our team visits your house in Briton Ferry, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Briton Ferry.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about first-floor extensions in Briton Ferry
How much does a first-floor extension cost in Briton Ferry?
Our guide for Wales, which covers Briton Ferry, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Briton Ferry?
We cover Briton Ferry (SA12) and nearby places including Neath, Cwmafan and Clydach, plus the rest of Swansea and Neath Port Talbot. The first site visit is free.
Do I need planning permission for a first-floor extension in Briton Ferry?
Briton Ferry is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
We also cover places near Briton Ferry, including:
Other extensions in Briton Ferry
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Briton Ferry · First-floor extensions across Swansea and Neath Port Talbot
Want a figure first? Try our guide price tool, then book a free visit to firm it up.