First-floor extensions in Cwmafan

The basics for Cwmafan at a glance.

Postcode districts: SA12 and SA13
County / area: Swansea and Neath Port Talbot, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Briton Ferry (2.6 miles), Neath (3.7 miles), Maesteg (4.5 miles)
Distance to Swansea: about 7.8 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover Cwmafan (SA12 and SA13) and the places around it, including Briton Ferry (2.6 miles), Neath (3.7 miles) and Maesteg.

What it costs in Cwmafan

For budgeting in Cwmafan, allow around £23,000–£33,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,660–£2,390 per m² including VAT for Wales. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Cwmafan

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Cwmafan homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Look at the house
We start in Cwmafan with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Cwmafan.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Cwmafan

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Cwmafan?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Cwmafan?

Cwmafan is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Cwmafan

All two-storey extension services in Cwmafan · First-floor extensions across Swansea and Neath Port Talbot

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Cwmafan.