First-floor extensions in Swansea
We plan and build first-floor extensions for homeowners in Swansea and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.
What we'd confirm first for a project in Swansea.
- Postcode districts
- SA1, SA2, SA3 and SA5
- County / area
- Swansea and Neath Port Talbot, Wales
- Price region
- Wales
- Guide price
- £23,000–£33,500 (£1,660–£2,390 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Clydach (4.7 miles), Briton Ferry (5.4 miles), Gorseinon (5.4 miles)
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
We cover postcode districts SA1, SA2, SA3 and SA5 in and around Swansea, along with neighbouring Clydach, Briton Ferry and Gorseinon.
What it costs in Swansea
A guide price for Swansea: around £23,000–£33,500 for 4 m × 3.5 m of new first-floor space (14 m²). That works out at £1,660–£2,390 per m² of new floor space, including VAT at 20%. Professional fees for drawings and the structural engineer are listed separately on our prices page.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,520–£2,200 per m² | £21,500–£31,000 |
| Standard | £1,660–£2,390 per m² | £23,000–£33,500 |
| Premium | £1,990–£2,870 per m² | £28,000–£40,000 |
Planning and building regulations in Swansea
In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Swansea homes
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
How we'd run your project
Visit and first ideas
One of our team visits your house in Swansea, checks the walls, roof and drains, and sketches out options with you.
Design and approvals
We draw the extension and check it against the rules for Wales, then apply for planning permission or a certificate of lawfulness, whichever fits.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about first-floor extensions in Swansea
How much does a first-floor extension cost in Swansea?
Our guide for Wales, which covers Swansea, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Who handles building regulations for a project in Swansea?
We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Do I need planning permission for a first-floor extension in Swansea?
Swansea is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Nearby
The same service in neighbouring towns:
Other extensions in Swansea
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Swansea · First-floor extensions across Swansea and Neath Port Talbot
Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.