Faversham · Kent

First-floor extensions in Faversham

For a first-floor extension in Faversham, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Kent.

The basics for Faversham at a glance.

Postcode districts
ME13
County / area
Kent, England
Price region
South East England
Guide price
£27,500–£40,000 (£1,980–£2,860 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Whitstable (6.7 miles), Sittingbourne (7 miles), Canterbury (8.6 miles)
Distance to Maidstone
about 16.4 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Faversham (ME13) and the places around it, including Whitstable (6.7 miles), Sittingbourne (7.0 miles) and Canterbury.

What it costs in Faversham

Our guide for South East England is £1,980–£2,860 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Faversham at roughly £27,500–£40,000. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,820–£2,630 per m²£25,500–£37,000
Standard£1,980–£2,860 per m²£27,500–£40,000
Premium£2,380–£3,430 per m²£33,500–£48,000

Planning and building regulations in Faversham

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Faversham homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

  1. Start at your house

    We come to your home in Faversham, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Drawings and permission

    Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Faversham.

  3. Engineer it

    Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.

  4. Build and hand over

    We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Faversham

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Faversham?

We cover Faversham (ME13) and nearby places including Whitstable, Sittingbourne and Canterbury, plus the rest of Kent. The first site visit is free.

Who handles building regulations for a project in Faversham?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Other towns near Faversham:

Other extensions in Faversham

All two-storey extension services in Faversham · First-floor extensions across Kent

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Faversham.

CallGuide price