First-floor extensions in Whitstable

Whitstable: the key facts for this kind of project.

Postcode districts: CT5
County / area: Kent, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Herne Bay (4.5 miles), Canterbury (6.1 miles), Faversham (6.7 miles)
Distance to Maidstone: about 22.9 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode district CT5 in and around Whitstable, along with neighbouring Herne Bay, Canterbury and Faversham.

What it costs in Whitstable

In South East England, which includes Whitstable, we'd expect a first-floor extension to cost around £27,500–£40,000 for 4 m × 3.5 m of new first-floor space (14 m²), or £1,980–£2,860 per m² including VAT. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Whitstable

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Whitstable homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Visit and first ideas
One of our team visits your house in Whitstable, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Whitstable.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about first-floor extensions in Whitstable

Who handles building regulations for a project in Whitstable?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a first-floor extension cost in Whitstable?

Our guide for South East England, which covers Whitstable, is £1,980–£2,860 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Whitstable?

We cover Whitstable (CT5) and nearby places including Herne Bay, Canterbury and Faversham, plus the rest of Kent. The first site visit is free.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Other towns near Whitstable:

Other extensions in Whitstable

All two-storey extension services in Whitstable · First-floor extensions across Kent

Tell us about your house in Whitstable and we'll call you back to arrange a free, no-obligation visit.