First-floor extensions in Canterbury

Before you start in Canterbury, here's what applies.

Postcode districts: CT1, CT2, CT3 and CT4
County / area: Kent, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Whitstable (6.1 miles), Herne Bay (6.8 miles), Faversham (8.6 miles)
Distance to Maidstone: about 24.4 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Canterbury sits about 24.4 miles from Maidstone. Closer to home, Whitstable is 6.1 miles away and Herne Bay 6.8 miles.

What it costs in Canterbury

Using our South East England rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000, including VAT. Bigger or more glazed designs cost more per m². These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Canterbury

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Canterbury homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Look at the house
We start in Canterbury with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about first-floor extensions in Canterbury

Who handles building regulations for a project in Canterbury?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a first-floor extension cost in Canterbury?

Our guide for South East England, which covers Canterbury, is £1,980–£2,860 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Canterbury?

We cover Canterbury (CT1, CT2, CT3 and CT4) and nearby places including Whitstable, Herne Bay and Faversham, plus the rest of Kent. The first site visit is free.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Canterbury

All two-storey extension services in Canterbury · First-floor extensions across Kent

Book a free site visit in Canterbury and we'll tell you what's possible, what approvals you need and what the design stage would cost.