Two-storey wraparound extensions in Canterbury

Before you start in Canterbury, here's what applies.

Postcode districts: CT1, CT2, CT3 and CT4
County / area: Kent, England
Price region: South East England
Guide price: £132,500–£181,500 (£2,360–£3,250 per m²)
Approval route: Planning permission is needed: the side part takes it outside permitted development in England.
Nearest towns: Whitstable (6.1 miles), Herne Bay (6.8 miles), Faversham (8.6 miles)
Distance to Maidstone: about 24.4 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above. In England it needs planning permission, because the side part is more than one storey.

We cover postcode districts CT1, CT2, CT3 and CT4 in and around Canterbury, along with neighbouring Whitstable, Herne Bay and Faversham.

What it costs in Canterbury

A guide price for Canterbury: around £132,500–£181,500 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). That works out at £2,360–£3,250 per m² of new floor space, including VAT at 20%. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£2,180–£2,990 per m²	£122,000–£167,000
Standard	£2,360–£3,250 per m²	£132,500–£181,500
Premium	£2,840–£3,890 per m²	£159,000–£218,000

Planning and building regulations in Canterbury

In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Canterbury homes

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

Daylight to the middle

A deep L-shaped plan can leave the middle of the ground floor dark, because the old rear rooms are now enclosed. We use wide rear openings, a well-placed stair and, where part of the extension is single storey, roof lights, while keeping total glazing within the Part L allowance.

How we'd run your project

Visit and first ideas
One of our team visits your house in Canterbury, checks the walls, roof and drains, and sketches out options with you.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about two-storey wraparound extensions in Canterbury

Who handles building regulations for a project in Canterbury?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a two-storey wraparound extension cost in Canterbury?

Our guide for South East England, which covers Canterbury, is £2,360–£3,250 per m² including VAT. A typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) comes to about £132,500–£181,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a two-storey wraparound extension in Canterbury?

Canterbury is in England, so England planning rules apply. Planning permission is needed: the side part takes it outside permitted development in England. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

Nearby

Close to Canterbury? We work across the area, including:

Other extensions in Canterbury

All two-storey extension services in Canterbury · Two-storey wraparound extensions across Kent

The quickest next step is a visit. We'll look at your house in Canterbury and give you an honest view of the options.