Part single, part two-storey extensions in Canterbury

Before you start in Canterbury, here's what applies.

Postcode districts: CT1, CT2, CT3 and CT4
County / area: Kent, England
Price region: South East England
Guide price: £79,000–£109,000 (£2,200–£3,030 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Whitstable (6.1 miles), Herne Bay (6.8 miles), Faversham (8.6 miles)
Distance to Maidstone: about 24.4 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode districts CT1, CT2, CT3 and CT4 in and around Canterbury, along with neighbouring Whitstable, Herne Bay and Faversham.

What it costs in Canterbury

Using our South East England rates, a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £79,000–£109,000, including VAT. Bigger or more glazed designs cost more per m². We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,020–£2,780 per m²	£73,000–£100,000
Standard	£2,200–£3,030 per m²	£79,000–£109,000
Premium	£2,640–£3,630 per m²	£95,000–£130,500

Planning and building regulations in Canterbury

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Canterbury homes

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Visit and first ideas
One of our team visits your house in Canterbury, checks the walls, roof and drains, and sketches out options with you.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about part single, part two-storey extensions in Canterbury

Who handles building regulations for a project in Canterbury?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Canterbury?

We cover Canterbury (CT1, CT2, CT3 and CT4) and nearby places including Whitstable, Herne Bay and Faversham, plus the rest of Kent. The first site visit is free.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

We also cover places near Canterbury, including:

Other extensions in Canterbury

All two-storey extension services in Canterbury · Part single, part two-storey extensions across Kent

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.