First-floor extensions in Wrexham

Useful details for planning a first-floor extension in Wrexham.

Postcode districts: LL13
County / area: Clwyd, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Gresford (2.8 miles), Coedpoeth (3 miles), Brymbo (3.4 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Around Wrexham we also work in Gresford, Coedpoeth and Brymbo, and across the rest of Clwyd. Postcode district in and near Wrexham: LL13.

What it costs in Wrexham

Most of the cost of a first-floor extension is set by its size and specification. For Wrexham and the rest of Wales, our guide is £1,660–£2,390 per m² including VAT, so about £23,000–£33,500 for 4 m × 3.5 m of new first-floor space (14 m²). Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Wrexham

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Wrexham homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Start at your house
We come to your home in Wrexham, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Get it approved
Once you're happy with the design we submit it to the council for Wrexham and deal with any questions from the planning officer.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Wrexham

How much does a first-floor extension cost in Wrexham?

Our guide for Wales, which covers Wrexham, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a first-floor extension in Wrexham?

Wrexham is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

We also cover places near Wrexham, including:

Other extensions in Wrexham

All two-storey extension services in Wrexham · First-floor extensions across Clwyd

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.