Part single, part two-storey extensions in Swanscombe

Quick reference for homeowners in Swanscombe.

Postcode districts: DA9 and DA10
County / area: Kent, England
Price region: South East England
Guide price: £79,000–£109,000 (£2,200–£3,030 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Grays (2.1 miles), Tilbury (2.3 miles), Gravesend (2.6 miles)
Distance to Maidstone: about 15.3 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Swanscombe we also work in Grays, Tilbury and Gravesend, and across the rest of Kent. Postcode districts in and near Swanscombe: DA9 and DA10.

What it costs in Swanscombe

In South East England, which includes Swanscombe, we'd expect a part single, part two-storey extension to cost around £79,000–£109,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £2,200–£3,030 per m² including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,020–£2,780 per m²	£73,000–£100,000
Standard	£2,200–£3,030 per m²	£79,000–£109,000
Premium	£2,640–£3,630 per m²	£95,000–£130,500

Planning and building regulations in Swanscombe

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Swanscombe homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Start at your house
We come to your home in Swanscombe, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Swanscombe

Which postcodes do you cover around Swanscombe?

We cover Swanscombe (DA9 and DA10) and nearby places including Grays, Tilbury and Gravesend, plus the rest of Kent. The first site visit is free.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a part single, part two-storey extension cost in Swanscombe?

Our guide for South East England, which covers Swanscombe, is £2,200–£3,030 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £79,000–£109,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

Close to Swanscombe? We work across the area, including:

Other extensions in Swanscombe

All two-storey extension services in Swanscombe · Part single, part two-storey extensions across Kent

Tell us about your house in Swanscombe and we'll call you back to arrange a free, no-obligation visit.