Swanscombe · Kent

Two-storey rear extensions in Swanscombe

Homes in Swanscombe with a bit of space to the side or rear can often take a two-storey rear extension. We'll tell you honestly whether yours can, and what approvals it needs.

Useful details for planning a two-storey rear extension in Swanscombe.

Postcode districts
DA9 and DA10
County / area
Kent, England
Price region
South East England
Guide price
£61,500–£83,000 (£2,200–£2,970 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Grays (2.1 miles), Tilbury (2.3 miles), Gravesend (2.6 miles)
Distance to Maidstone
about 15.3 miles
First visit
Free, no obligation

About a two-storey rear extension

A two-storey rear extension is a new two-floor addition built onto the back of your house, usually giving a larger kitchen or living space on the ground floor and one or two bedrooms or a bathroom above. Because both floors share one set of foundations and one roof, it adds a lot of floor space for the garden it uses. In some cases it can be built under permitted development, depending on where you live.

Swanscombe sits about 15.3 miles from Maidstone. Closer to home, Grays is 2.1 miles away and Tilbury 2.3 miles.

What it costs in Swanscombe

In South East England, which includes Swanscombe, we'd expect a two-storey rear extension to cost around £61,500–£83,000 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), or £2,200–£2,970 per m² including VAT. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

SpecPer m²A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential£2,020–£2,730 per m²£56,500–£76,500
Standard£2,200–£2,970 per m²£61,500–£83,000
Premium£2,640–£3,560 per m²£74,000–£100,000

Planning and building regulations in Swanscombe

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Swanscombe homes

Upstairs layout and windows

Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.

Depth and neighbours' light

Councils check that a two-storey rear extension does not take too much light or outlook from neighbouring windows, and many use a 45-degree line drawn from the nearest habitable window. We test this at sketch stage, so the depth you are shown is one that can realistically be approved.

How we'd run your project

  1. Free site visit

    We visit your home in Swanscombe, look at the structure, access and boundaries, and talk through what you want the new rooms to do.

  2. Choose the approval route

    Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.

  3. Detail and price

    Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.

  4. Build

    Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about two-storey rear extensions in Swanscombe

Do I need planning permission for a two-storey rear extension in Swanscombe?

Swanscombe is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Who handles building regulations for a project in Swanscombe?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a two-storey rear extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Nearby

Other towns near Swanscombe:

Other extensions in Swanscombe

All two-storey extension services in Swanscombe · Two-storey rear extensions across Kent

Want a figure first? Try our guide price tool, then book a free visit to firm it up.

CallGuide price