First-floor extensions in Swanscombe

Swanscombe: the key facts for this kind of project.

Postcode districts: DA9 and DA10
County / area: Kent, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Grays (2.1 miles), Tilbury (2.3 miles), Gravesend (2.6 miles)
Distance to Maidstone: about 15.3 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode districts DA9 and DA10 in and around Swanscombe, along with neighbouring Grays, Tilbury and Gravesend.

What it costs in Swanscombe

Guide prices for first-floor extensions in South East England are around £1,980–£2,860 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £27,500–£40,000. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Swanscombe

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Swanscombe homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

How we'd run your project

Look at the house
We start in Swanscombe with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Swanscombe

Who handles building regulations for a project in Swanscombe?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Swanscombe?

We cover Swanscombe (DA9 and DA10) and nearby places including Grays, Tilbury and Gravesend, plus the rest of Kent. The first site visit is free.

How much does a first-floor extension cost in Swanscombe?

Our guide for South East England, which covers Swanscombe, is £1,980–£2,860 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Other towns near Swanscombe:

Other extensions in Swanscombe

All two-storey extension services in Swanscombe · First-floor extensions across Kent

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.